CUSHION TANK SMALL

Giá: Liên hệ

Technical Specifications

Dimensions: L600 x W450mm x H800mm

Material: HDPE

Color: Orange-Red

The product does not break upon impact.
HDPE plastic has the advantages of high durability, flexibility, and tensile strength, helping to absorb impact forces. The plastic will twist, minimizing damage to vehicles and drivers.
The cushion tank is equipped with reflective strips around it, making it easier for drivers to notice at night.

Features:

The product has a lid and can be filled with sand to increase its weight, enhancing its resistance to strong winds and high-speed impacts.
Prevents secondary injury in the event of a collision between a car and the cushion tank.
Prevents vehicles from crashing into guardrails or other critical areas that need protection.
The product can be easily installed, moved, and deployed in a short period of time.

Installation Location:

Install the small cushion tank in front of the PE water-filled barrier, in front of lane dividers, guardrails, at the beginning of median strips leading to branch roads, before toll stations, and in front of critical areas that need protection.

Technical drawing

Carefully select a flat surface for installation.
Place the mounting bracket on the base surface and mark 2 screw holes.
Use a ø17 drill bit to drill holes 100mm deep at the marked locations.
Align the mounting bracket with the drilled holes on the base surface and secure it using screws and plastic anchors.
Position the body of the cushion tank onto the mounting bracket, align the screws, and then tighten the screws on both sides of the bracket to secure the body and the mounting bracket.
Add sand inside the cushion tank and then close the lid.

Complete.